Back

Alton Bay Station. Alton, New Hampshire
Kit 1004-A Passenger Station
Kit 1004-B Covered Passenger Platform
Kit 1004-C Freight House

Photo of build up station

Phtoto of the station from a post card

This photo from a postcard, shown above, shows the station as it existed around the year 1890.

Phtoto of the station from a post card

This photo, about from the same time period, is taken from the waterfront side.

The Cocheco Railroad was chartered on July 2, 1847. It's original charter was to reach from Dover, NH to Meredith, NH were it would connect to the Boston, Concord and Montreal Railroad. On June of 1848 construct began. Tracks opened from Dover, NH to Farmington, NH on September 21, 1849 and then opened as far as Alton Bay, NH in September of 1951.

There is one not-so-great photo at the Alton Historical Society that shows a small "garden-shed" style railroad station at Alton Bay from the 1850's era. This was the first station built at Alton Bay. The Cocheco Railroad never reached it's final destination of Meredith - with Alton Bay being the end of the line. In April of 1863 the Cocheco Railroad reorganized as the Dover and Winnipiseogee Railroad and in November of that same year it was leased to the Boston and Maine Railroad. In June of 1892 the Dover and Winnipiseogee Railroad was absorbed into the Boston and Maine Railroad.

A 1859 photo shows the freight house as a "stand alone" structure that was not connected to any other building. The second station must have been built near by and the covered platform, to connect the two structures, an afterthought.

The earliest photos I can find of the second station built at this site shows a side wheel steam ship, presumably the "Mount Washington", docked at the platform. This steamship was built in 1872 for the Boston and Maine Railroad. The previous steamer "Dover", later named "Cocheco" was not a side wheel steamer. While I can find no records of when this station was built it is my guess that it was in the vicinity of the 1870's. Both the station and the freight house had, at one time, "drive through" service with the tracks leading all the way through the station, under the platform roof and out the freight house. As rolling stock and engines grew larger, it eventually became impossible for equipment to pass under the station and the tracks leading under the station's hood were "stubbed" just short of the station. Tracks to the freight house still allowed for equipment to enter the building from the north end of the yard. This second station is what this kit is modeled after.

The station was destroyed by fire on November 4, 1906.

A third station was built shortly there after just a couple hundred feet down the tracks. Although rail service ended on this branch in 1936, and roadways now pave where tracks use to be the replacement station still stands. And just across the road from this station (at the entrance to the Alton Bay Campgrounds Association) you can still see the cement footings for where the water tower once stood. Pop's Clam Shell is in a close proximity to the were a small 2-3 stall roundhouse stood complete with a turntable.

The entire station is made up of three separate kits:
Kit 1004-A Passenger Station
Kit 1004-B Covered Passenger Platform
Kit 1004-C Freight House



The Passenger Station
Kit 1004-A
Kit 1 of 3 for the entire Alton Bay Station

Photo of the Station kit

Photo of the Station

This kit features:
  • Laser cut wood for easy assembly
  • Peel & stick shingles
  • Mold injected windows and doors
  • Shades printed on the acetate windows
  • Several metal castings
  • Simple step by step instructions
  • Proudly made in the USA
This kit contains small parts and is not intended for small children.

Kit 1004-A: Price: $64.95 




The Covered Passenger Platform
Kit 1004-B
Kit 2 of 3 for the entire Alton Bay Station

Photo of the Covered Plateform kit

Photo of the Covered Plateform

This kit features:
  • Laser cut wood for easy assembly (Only one piece of stripwood!)
  • Can be assembled in to two small covered platforms
  • Peel & stick shingles
  • Simple step by step instructions
  • Proudly made in the USA
This kit contains small parts and is not intended for small children. Figures not included.

Kit 1004-B: Price: $164.95




The Freight House
Kit 1004-C
Kit 3 of 3 for the entire Alton Bay Station

Photo of the Freight House

Photo of the Freight House

This kit features:
  • Laser cut wood for easy assembly

Peel & stick shingles

  • Mold injected windows and doors
  • Shades printed on the acetate windows
  • Simple step by step instructions
  • Proudly made in the USA

This kit contains small parts and is not intended for small children. Figures and freight cars included.

Kit 1004-C: Price: $149.95




   
   
   
   
       
    If you are interested in anything you see here or have any questions,
Please e-mail us at fsm_com@hotmail.com